Safety standards
Designed for review against UL 2594, UL 2231, and CSA C22.2 No. 280:22 requirements by final AW32 Level 2 EV charger configuration.
EVP700 / AW32
AW32
The AW32 Level 2 EV charger is built for compact commercial, workplace, multifamily, fleet, and private-site deployments that need reliable AC charging in a smaller enclosure.
6-7.7 kW AC32A max outputNEMA Type 3ROCPP-ready
AW32 introduction
A compact Level 2 EV charger built for everyday site operations.
The AW32 Level 2 EV charger gives commercial properties a smaller AC charging platform for daily driver use, shared parking, tenant amenities, workplace charging, and fleet support. Lorem ipsum dolor sit amet for AW32-specific rebate, CALGreen, EPRI listing, procurement, permitting, and installation submittal details.
Compliance
FCC / EMC
References 47 CFR Part 15 Subpart B for AW32 electromagnetic compliance documentation.
OCPP support
Backend support includes OCPP 1.6J and OCPP 2.0.1 for connected AW32 charger management workflows.
Installation review
TT / TN and IT earthing support, NEMA Type 3R enclosure rating, and site-specific electrical review support deployment planning.
Compatibility
J1772
Standard North American Level 2 EV charger connector option. Lorem ipsum dolor sit amet for AW32-specific connector notes.
Specifications
Core AW32 Level 2 EV charger specifications.
Charging output
- Charging level
- AC Level 2
- Input voltage
- 200-240 Vac, 50 / 60 Hz
- Output current
- 32A max
- Power rating
- 6-7.7 kW
- Connector
- SAE J1772 Type 1
Mechanical and environmental
- Enclosure rating
- NEMA Type 3R
- Impact rating
- IK08
- Dimensions / weight
- 10.24 x 11.02 x 3.94 in; 8.8 lbs (17 ft) / 11 lbs (25 ft)
- Cable length
- 17 ft / 25 ft
- Temperature
- -22°F to +122°F operating; -40°F to +158°F storage
Connectivity and access
- Backend support
- OCPP 1.6J, OCPP 2.0.1
- Authentication
- RFID, QR code, optional credit card reader
- Status indicator
- LED
- Communication
- Ethernet, Wi-Fi / LTE
- Display
- N/A
Protection
- RCD / CCID
- CCID 20
- Input side
- UVP, OVP, GMI, surge
- Output side
- OCP, control pilot fault
- Internal
- OTP, relay monitor, self-test
- Altitude
- Up to 6561.68 ft
Ordering guide
AW32 Level 2 EV charger models and part numbers.
Use this ordering guide to compare AW32 Level 2 EV charger configurations by network capability, cable length, connector type, and pedestal accessory requirements. Lorem ipsum dolor sit amet for final AW32 ordering details.
| Type | Part number | Key features | Configuration |
|---|---|---|---|
| Charger | AWLU770001W2P1-RW |
| AW32, 32A wall-mount, 16.4ft cable, LAN + Wi-Fi, OCPP, 2 RFID cards included, optional credit card reader, 8.82lbs. |
| Charger | AWLU770001T2P1-RW |
| AW32, 32A wall-mount, 16.4ft cable, LAN + 4G, OCPP, 2 RFID cards included, optional credit card reader, 8.82lbs. |
| Charger | AWLU770001T2P2-RW |
| AW32, 32A wall-mount, 25ft cable, LAN + 4G, OCPP, 2 RFID cards included, optional credit card reader, 8.82lbs. |
| Pedestal | CPEVAC-PED-R11-DUO-BSE-W |
| PED-R11-DUO-BSE-W. Pedestal for dual AW32 / AX48 base - white. |
| Pedestal | CPEVAC-PED-R11-ONE-TOP-W |
| PED-R11-ONE-TOP-W. Rectangle pedestal for single AW32 add-on top - white. |
| Pedestal | CPEVAC-PED-R11-ONE-TOP-W-25ft |
| PED-R11-ONE-TOP-W-25ft. Rectangle pedestal for single AW32 add-on top with 23ft cables - white. |
| Pedestal | CPEVAC-PED-R11-DUO-TOP-16FT-W |
| PED-R11-DUO-TOP-16FW. Pedestal for dual AW32 add-on top, 16ft - white. |
| Pedestal | CPEVAC-PED-R11-DUO-TOP-25FT-W |
| PED-R11-DUO-TOP-25FW / KITC0NMAXPH02-RW. Pedestal for dual AW32 add-on top, 25ft - white. |
Level 2 EV charger features
AW32 Level 2 EV Charger
Ready, charging, and fault indicators help drivers understand station status at a glance.
Supports RFID and QR-code workflows, with optional credit card reader support by configuration.
Ethernet, Wi-Fi, and LTE communications support monitoring, reporting, and remote charger management.
SAE J1772 Type 1 compatibility supports standard Level 2 charging for most North American EVs.
Specifications and speeds
Charging speeds by vehicle
| Vehicle | Where battery was when charging started | Time to go from 20 to 80% | Battery size (kWh) | Power gained going from 20% to 80% |
|---|---|---|---|---|
| Tesla Y | 20% | 5.5 hours | 75 | 45 kWh |
| Tesla Y | 50% | 3.4 hours | 75 | 22.5 kWh |
| Ford Lightning | 20% | 9.5 hours | 131 | 78.6 kWh |
| Ford Lightning | 50% | 6 hours | 131 | 39.3 kWh |
Universal charging means speeds vary by make and model
Charging times are calculated to 80% since most EVs significantly slow charging speeds beyond that point to protect battery health.
Product overview
AW32 Level 2 EV charger for compact commercial sites.
The AW32 gives project teams a compact Level 2 EV charger platform for sites that need dependable daily charging, commercial installation options, and connected controls in a smaller footprint. Lorem ipsum dolor sit amet for AW32-specific deployment details, rebate documentation requirements, and final configuration guidance.
Typical fit
HotelsWorkplacesMultifamily CommunitiesCampusesAnd Public Parking
- Wall-mount or pedestal-mounted charging layouts
- Private, public, or mixed-access charging programs
- Sites that need reporting, pricing, RFID, QR, app, or CSMS workflows
Software and network operations
Level 2 EV chargers connected to software.
Networked AW32 Level 2 EV charger deployments can support QR-code starts, RFID access, mobile app workflows, station reporting, pricing rules, and charger visibility across one site or a broader portfolio. Lorem ipsum dolor sit amet for AW32-specific software behavior.
Learn more about software
Contact us
Need AW32 Level 2 EV charger specs?
Share the site type, charger quantity, mounting needs, connector preference, rebate requirements, and target installation timeline. TurnOnGreen can help confirm the right AW32 configuration and supporting documentation.